模拟类型放大器

Advanced Motion Controls' family of brush & brushless模拟伺服驱动器＆Motors在简单性和性能方面都提供无与伦比的好处。驱动器设置和操作比数字驱动器更简单，同时以较低的成本获得更高的带宽和更快的响应时间。自第一天起，模拟驱动技术一直是伺服系统解决方案的主要内容，我们在建造最高质量产品的多年经验创造了稳固且不断改进的模拟驱动器选择。各种命令选项，包括±10V模拟，PWM和Direction，Dual Sine Wave和专用电动汽车命令，使Advanced Motion Controls的Brush＆Brushsless Analog Servo家族为经过验证的伺服解决方案提供了最佳选择。

全部AMC's Analog Servo Drives feature:

• 内置硬件保护 - 电流，超过电压，高温，短路
• DIP Switches and Potentiometers for loop tuning, current limit adjustments, and drive configuration
• Standard models for both brushed and brushless motor varieties
• Velocity feedback provided by incremental encoder, Hall Sensors, or tachometer
• 模拟位置循环控制可用
• 大多数型号的高功率信号标准之间的光学隔离
• 当前的, Velocity, and Fault Monitor analog output signals
• 功率和驱动器状态的状态LED
• Standard models in both Panel Mount, PCB Mount (Z-Drives), and Vehicle Mount (M/V™ Series Motor Controllers)
• 四个象限再生操作
• Extended Environment versions available (AZX series Z-Drives)

µZ插件驱动器

µZ’s are the smallest off-the-shelf servo drives from ADVANCED Motion Controls. Pronounced ‘Micro-Z’ these plug-in drives are designed for embedded applications in a wide range of industries including: Robotics, Lab Automation, Homeland Security/Military, Electric Mobility, Medical and Packaging.

µZ servo drives are designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drives are designed for direct integration into your PCB. Weighing in at less than 9 grams, µZ Drives output 10A peak and 5A continuous and operate with a bus voltage range of 10-36VDC.

设计的无需散热器，µZ是真正的轻量轻量级，重量比。µZ受到完全保护，免受过电压，电压，过度加热和短路的过度保护。根据模型，驱动与具有模拟±10V或PWM/方向命令的数字控制器的接口。这些伺服驱动器仅需要一个不受管制的隔离直流电源，并且是完全ROHS（减少危险物质）。

特征：

• Designed for direct board-to-board integration.
• No heatsink and no need for additional heatsinking results in the smallest installed volume
• No heatsink and no need for additional heatsinking results in the smallest installed volume
• Feather weight, less than 9 grams
• 尺寸（mm）38.1 x 38.1 x 7.34对于当前模式，速度 /占空比43.2 x 38.1 x 9.4
• Dimensions (in) 1.50 x 1.50 x 0.29 for current mode models, 1.70 x 1.50 x 0.37 for velocity / duty cycle models
• 较大的操作温度范围为0-85°C
• Compatible with low inductance motors
• Smallest form factor of any off-the-shelf servo drive from ADVANCED Motion Controls
• 40 kHz开关频率