The Lintech 140 series linear actuators are designed to handle light loads at very high speeds. These linear slides use a low friction, preloaded, recirculating linear ball bearing system, which ride on a single precision ground linear square rail. The linear profile rail is mounted to a precision machined aluminum base, which offers a rigid support over the entire travel of the table's carriage. The load is mounted to a precision machined aluminum carriage, which has threaded stainless steel inserts for high strength and wear life. The drive system uses two pulleys, along with a high strength, steel reinforced polyurethane belt, which provides 3.543 inches (90 mm) of linear movement per revolution of the input shaft. The simple belt tensioning system allows for easy adjustment of belt tension by the user. NEMA 23 & 34 motor mounts, or gearhead mounts are available as well as planetary gearheads.
Features
Manufacturer | Lintech |
---|---|
Bearing Guide Mechanism | Profile Rail |
Carriage Length (mm) | 102 |
Carriage Length (in) | 4 |
Carriage Width (mm) | 73 |
Carriage Width (in) | 2.875 |
Drive Mechanism | Belt Drive |
Dynamic Load Capacity (kg) | 90.7 |
Dynamic Load Capacity (lbs) | 200 |
Material | Aluminum|Stainless Steel |
最大高度(mm) | 76.2 |
最大高度(in) | 3 |
Max Width (mm) | 73 |
Max Width (in) | 2.875 |
Max Length (mm) | 1321 |
Max Length (in) | 52 |
Max Linear Travel (mm) | 1067 |
马克斯线性旅行(在) | 42 |
Max Linear Velocity (m/s) | 1.98 |
Max Linear Velocity (in/s) | 78 |
Min Operating Temperature (°C) | -18 |
Min Operating Temperature (°F) | 0 |
Max Operating Temperature (°C) | 80 |
Max Operating Temperature (°F) | 176 |
Repeatability (mm) | 0.0002 |
Repeatability (in) | 0.00508 |
Output Feedback | Home Switch (Optional)|Limit Switches (Optional) |
Sample image only. Product may differ